Home / News

What auxiliary equipment does the general laser cutting machine have?

Dec. 31, 2019

When the Fiber Laser Cutting Machine is working normally, in addition to the operation table and processing machine, it also needs some other auxiliary supporting equipment to ensure its normal operation. What auxiliary equipment does the general laser cutting machine have?

Fiber Laser Cutting Machine

Fiber Laser Cutting Machine

Auxiliary devices of laser cutting machines include air compressors and cold water machines. In order to ensure the cutting quality and cutting effect, they must be indispensable.

In order to achieve a relatively high cutting quality and effect, clean, dry and stable air is required. The role of the air compressor is to supply part of the cutting gas composed of high-purity oxygen and high-purity nitrogen to the cutting head, and the other part as a power source for the cylinder that clamps the worktable, and then part of it is used to clean the optical path system .

The chiller is a device to ensure that the laser cutting machine works under constant temperature conditions. The laser cutting machine generates a lot of heat during processing. If the temperature is not cooled in time, the laser parts will be overheated and damaged. The protection can make the laser cutting machine process at a constant temperature. The auxiliary equipment of a laser cutting machine is more important for it.

The laser cutting machine is a relatively common processing tool. Metal laser cutting machine has low cost, stable performance and a wide range of cutting materials. How about the quality and speed of product cutting by China Laser Equipment Manufacturer?

The processing method of a laser cutting machine is cold forming and hot working. There are mainly saw cutting, wire cutting processing, water cutting, shear cutting, punch processing, drilling processing and other methods.

There are two main cutting methods: plasma cutting and laser cutting. Laser cutting is fast and efficient, and the cutting quality is much better than plasma.

The laser beam is irradiated to the surface of the stainless steel workpiece, and the energy released by the laser melts and evaporates the local surface of the stainless steel workpiece to achieve the purpose of cutting and engraving.

The strict control of laser cutting process parameters during processing can maintain good corrosion resistance of such materials. The possible cause of the small, regular burrs in the form of drips is that the focus is too low and the feed rate is too high. This can be solved by raising the focus and reducing the feed rate.

长 Large irregular burrs are generated on both sides. The discoloration of the surface of the plate may be caused by too low feed rate and too high focus. Increases feed rate and reduce focus.

The laser cutting machine only produces long irregular burrs on one side of the cutting edge. The nozzle may not be centered and the focus is too high. Solution Align the nozzles and lower the focus. The cutting quality and speed of laser cutting machine manufacturers' products can meet the corresponding requirements.

Our company also has 500w Laser Cutting Machine on sale, welcome to consult.

Contact Us