+86 317 3778 258
As a China Laser Equipment Manufacturer, I would like to share with you that
due to warmer temperatures and higher air humidity since March, we should also
do some corresponding summer work for our laser cutting machines:
Fiber Laser Cutting Machine
1. Make sure that the temperature of the cooling water does not differ too much from the air temperature. Both the laser and the optical lens of the laser cutting machine use water cooling methods. The water in the air will condense into water when it is cold. When the temperature of the cooling water is lower than room temperature 5 At -7 degrees, water dew condensation will occur on the surface of the laser and the optical lens, which affects the light output efficiency of the laser and the transmission of the optical lens, which greatly affects the laser energy and the service life of the optical accessories. It is recommended that the majority of laser cutting machine users set the water temperature to 30-32 degrees, and control the temperature difference between the cooling water temperature and the room temperature to be greater than 7 degrees.
2. In summer, the temperature rises and the working pressure of the cooling system of the laser cutting machine increases. It is recommended to check and maintain the internal pressure of the cooling machine in the snow before the high temperature comes. The equipment pressure of different manufacturers is not the same. It is recommended to consult the equipment manufacturer before maintenance. Specific parameters.
3. Due to the high temperature in summer, the deterioration rate of cooling water will also increase. It is recommended that users of laser cutting machines use distilled water or pure water, and regularly clean up the scale, so as to avoid the scale attached to the laser and the pipeline to affect the laser power. Different types of laser cutting machines have different methods for cleaning scale. Please operate under the guidance of the equipment manufacturer.
4. Since the dust of metal laser cutting machine is mainly metal powder, it is recommended to regularly clean the dust in the electrical cabinet of the laser cutting machine and check the working condition of the cooling fan.
Summary: Scientific and orderly maintenance can reduce some minor problems in the use of laser cutting machines, increase the performance and service life of some accessories, and virtually increase the efficiency of work
With the development of lasers and the acceleration of process production, traditional cutting equipment is being replaced by laser cutting machines. In the face of a wide range of China Laser Cutting Machineson the market, how do you choose? Exaggerated and bragging, unscrupulous merchants Well, to deceive consumers, many people are dazzled. The poor quality of the laser will directly affect the normal operation and service life of the laser cutting machine. When choosing a laser cutting machine, you must first understand the laser, because the quality of this laser is better, and the processing technology is also sophisticated, and problems are not easy to occur during use.
Our company also has Fiber Laser Cutting Machine on sale, welcome to consult.